Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 24, 2025～Oct 21, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 24 items
This is an introduction to outboard motor performance testing.
[Summary] This is a testing device that conducts performance tests of outboard motors using a combination of a small marine outboard motor and a power meter, controlled by a three-loop system.
Performance testing of stationery and furniture
We conduct quality tests on stationery, paper products, furniture, and more. We create, translate, and provide English translations of MSDS. We prepare documents for Eco Mark applications and act as agents for the application process. We analyze hazardous substances.
Energy conservation and reduction of crude oil and CO2! Actual measurements of three methods: conventional, high airtightness and high insulation, and reflective construction methods.
We would like to introduce the performance tests of our thermal insulation material "Reflectix." We measured three types: traditional, high airtightness and high insulation, and Reflect method. Homes built using the Reflect method with our product show an overwhelming temperature difference between indoors and outdoors compared to the other two methods. We have proven that our 8mm thick product creates the most comfortable environment. 【Test Results by Method】 ■Traditional Method: Maximum outdoor temperature 35.0℃, maximum indoor temperature 32.5℃, temperature difference 2.5℃ ■High Airtightness and High Insulation Method: Maximum outdoor temperature 32.5℃, maximum indoor temperature 31.5℃, temperature difference 1.0℃ ■Reflect Method: Maximum outdoor temperature 35.0℃, maximum indoor temperature 28.5℃, temperature difference 6.5℃ *For more details, please download the PDF or feel free to contact us.
[Transport Test] A series of packaging tests will be conducted in accordance with the test sequence specified in ISTA 3E.
【ISTA 3E】 ISTA (International Safe Transit Association) is one of the international standards widely adopted around the world for the evaluation testing standards of packaged goods, similar to ISO and ASTM. In recent years, its presence has particularly increased in Southeast Asia and China, with more companies adopting ISTA testing standards as their internal standards. Additionally, the international standard for sterilization packaging in medical devices, ISO11607 (JIS T8041), recommends ISTA testing as one of the options for evaluating packaging performance. Our testing lab was accredited by ISTA in December 2010 and conducts packaging tests tailored to customer requirements in accordance with the testing methods specified by ISTA. ▼ For more details, please download the PDF document (recommended). ▼ For urgent inquiries, please contact us through the 'Contact Us' section below.
Over 300 medical device packaging validations per year! Leave the integrity testing of ISO 11607 sterile barrier systems to JBL.
Regarding the packaging and transportation of medical devices that enter the body (such as scalpels, catheters, syringes, etc.), it is necessary to demonstrate that they are sterile until the packaging is opened in the operating room or similar settings (ISO 11607:2019) and to submit and present test reports from a third-party organization. Therefore, when packaging and transporting medical devices, it is essential to conduct ISO 11607:2019 certification testing externally and obtain the test reports. Are you facing any of the following issues regarding ISO 11607 certification testing? - I want to obtain ISO 11607 certification, but I don't know what to do. - I was turned down for ISO 11607 certification testing and don't know where to request it. Based on our track record of over 300 validations of medical device packaging annually, we conduct performance testing of packaging systems in accordance with the testing methods described in Annex B Performance Testing of ISO 11607:2019. We provide a one-stop service from test plan development to test execution and report preparation, so please feel free to contact us for consultation. *For more details, please check the materials available for download in PDF format.
We will conduct detailed discussions with the development company regarding the testing methods and conditions to meet their requirements.
On behalf of companies that do not have testing equipment capable of using high-pressure hydrogen, we act as a third-party organization to conduct durability tests, performance tests, vibration tests, leak tests, pressure cycle tests, gas permeability tests, material evaluation tests, and more for hydrogen-related products and their materials. We will work closely with the developing companies to accommodate their requests regarding testing methods and conditions.
Supports diversification of exam content! It is possible to obtain the necessary detailed exam data.
We accept outsourcing for engine benchmarking tasks. We can conduct performance tests of engines developed in-house, verification experiments of functional components developed, and real-world tests for fuel efficiency and catalog data verification of competitor engines. We also have state-of-the-art bench engines available, allowing for immediate testing with existing engines. Please consult us about your testing requirements. 【Benefits】 ■ Engine limit tests can be conducted using SP and ECU ■ Changes to functional components and evaluations can be made even during testing ■ Simulation runs can be conducted under necessary operating conditions ■ Visualization tests of the combustion chamber can also be conducted using our visualization system ■ Sale of data obtained from tests conducted by us is also possible *For more details, please download the PDF or feel free to contact us.
The quality of Ukai casters is confirmed and guaranteed through various performance tests in accordance with JIS standards.
Load the maximum weight on the caster (or wheel) and continuously run it over a steel plate drum with protrusions for a certain distance to check the performance of the caster. This will serve as reference data for the running performance of the caster.
Conducting cycle tests and measuring reaction products! Introducing the materials used and test results.
We will introduce the performance test of alcohol gas decomposition using the photocatalyst "Titanistar." 【Decomposition Performance of Various Alcohol Gases and Cycle Tests】 Base Material: Titanistar MI-W, Titanium Plate 100mm x 100mm, and Titanium Mesh 100mm x 100mm Gas Used: Ethyl Alcohol and Isopropyl Gas, each at 100ppm In a 550ml quartz container, MI-W plate material and EtOH were sealed and exposed to ultraviolet light (1mw/cm²) for 1 hour, measuring the concentration every hour. After the concentration decreased to a certain level, a cycle test was conducted by sealing new gas to evaluate the durability of the photocatalytic film. Tests were also conducted using titanium mesh, IPA plates, and IPA mesh in the same manner. As a result, it was confirmed that various alcohols were decomposed, and the cycle test with new gas sealing also showed no significant difference in decomposition. For the titanium plate and mesh, it was confirmed that the mesh material with a higher surface area decomposed more quickly. *For more details, please download the PDF or feel free to contact us.
Our "hazardous materials drum" is designed to improve product safety through airtight testing, drop testing, hydrostatic testing, and load testing.
Nippon Steel Drum Co., Ltd. contributes to various industries as a top manufacturer of drums in Japan. Currently, as a member of Japan's largest steel manufacturer, the Nippon Steel Group, we are based in Koto Ward, Tokyo, and have a wide range of manufacturing plants located throughout industrial areas nationwide, providing the highest quality drums. Among our products, our "drums for hazardous materials" comply with regulations for the transportation and storage of hazardous materials, as well as related JIS standards (JIS Z 1600 and JIS Z 1601), and we strive to enhance product safety through various performance tests. In addition to "leak tests" and "hydrostatic tests," which involve introducing a certain amount of air or water into the drum and measuring for leaks from various parts, we conduct "drop tests" where we fill the drum with substances and drop it onto concrete or steel plates to measure impact resistance, and "load tests" where we place weights of specified loads on the drum to check for deformation or leakage of contents. *For details on each test, please contact us directly.*
![[Test] High Temperature High Shear Viscosity (HTHS Viscosity: TBS Method)](https://image.mono.ipros.com/public/product/image/d8f/2001231757/IPROS65257346339845586703.png?w=280&h=280)
Measuring the effective viscosity of lubricating oil in high-temperature, high-speed sliding parts of internal combustion engines!
We would like to introduce our lubricating oil testing analysis "High Temperature High Shear Viscosity (HTHS Viscosity: TBS Method)." This test measures the effective viscosity of lubricating oil in high temperature and high-speed sliding parts of internal combustion engines. The item number is L333, with a required volume of 80ml, and the standard numbers are ASTM D6616 (100°C) and ASTM D4683 (150°C). Please feel free to contact us if you have any requests. 【Test Details】 ■ Item Number: L333 ■ Required Volume: 80ml ■ Standard Numbers: ASTM D6616 (100°C), ASTM D4683 (150°C) *For more details, please refer to the PDF document or feel free to contact us.
![[Test] Rust prevention performance: Artificial seawater](https://image.mono.ipros.com/public/product/image/b24/2001231784/IPROS37030604407998813222.jpeg?w=280&h=280)
Evaluate the rust prevention performance of the sample! Immerse a steel test piece in a mixture of the sample heated to 60°C and artificial seawater.
We would like to introduce our lubricating oil test analysis "Rust Prevention Performance: Artificial Seawater." This test evaluates the rust prevention performance of the sample. A steel test piece is immersed in a mixture of the sample heated to 60°C and artificial seawater, and the degree of rust that develops on the test piece is assessed. The required amount is 600ml, and the standard number is JIS K2510. 【Test Details】 ■ Item Number: L316 ■ Required Amount: 600ml ■ Standard Number: JIS K2510 *For more details, please refer to the PDF document or feel free to contact us.
![[Test] Shell Four Ball Test: WL(EP)](https://image.mono.ipros.com/public/product/image/8e2/2001237597/IPROS38723781749471082774.jpeg?w=280&h=280)
Measuring the load capacity of lubricating oil! Determining the load at which steel balls fuse together.
We would like to introduce the lubricating oil test analysis "Shell Four-Ball Test: WL(EP)" that we conduct. This test measures the load-carrying capacity of lubricating oil. Four steel balls are stacked in a pyramid shape, and the test is conducted under specified conditions by increasing the load on the top ball, determining the load at which the steel balls weld together. The higher the value, the better the load-carrying performance of the lubricating oil. 【Test Details】 ■ Item Number: L301 ■ Required Amount: 300ml ■ Standard Number: ASTM D2783 *For more details, please refer to the PDF document or feel free to contact us.
DC13 is a simulation test for air and truck transportation of small packages weighing 68.1 kg or less.
ASTM D4169 is one of the most widely referenced transportation packaging test standards in the United States for a long time. It specifies tests based on 10 hazard factors during transportation, forming a comprehensive test that aligns with real transportation environments. Additionally, it is recommended as a performance test for packaging in the international standard for sterilization packaging in medical devices, ISO 11607 (JIS T8041). ▼ For more details, please download the PDF document (recommended). ▼ Customers in a hurry, please contact us via the 'Contact Us' section below.
Based on the content of ISO 4180, this is a testing method for evaluating the packaging of packaged goods against vibrations, drop impacts, and compression during the distribution process.
The document consists of two parts: the main body and the annexes. The main body is created based on ISO 4180, with technical content modified to reflect Japan's unique circumstances, while Annexes A and B are presented without changes to the content of ISO 4180: 2009. (Currently, ISO 4180: 2019 has been issued, so it is recommended to refer to the latest version for the application of Annex A unless there are special reasons.) ▼ For more details, please download the PDF materials. (Recommended) ▼ If you need immediate assistance, please contact us using the "Contact Us" section below.
